(Base軸に接続)Disconnected Stopped正在启动机器人驱动程序:C:/RoboDK/api/robot/MotomanHSE.exe正在启动…发送命令……ErrorSMS: RoboDK司机对Motoman v4.8.3 (HSE和串行)加载设置:C: / /中/ AppData /漫游用户/ RoboDK-Drivers / MotomanHSE.exe.ini默认工具ID: 0默认关节速度(毫米/秒):10默认线性速度(毫米/秒):5 Big Endian交流:没有数量的外部轴0外部轴对照组1外部轴对照组基础:假机器人对照组1连续超时:250 ms系列暂停:25 SERIAL_BAUD女士:9600 SERIAL_DATA_BITS: 8 SERIAL_PARITY: 2 SERIAL_STOPBITS:1 SERIAL_FLOW_CONTROL: 0未连接(もう一度接続を押したときのメッセージ)发送命令……采用高速以太网协议。连接到E-Server工作中…使用0轴系统工作…未连接无效的机器人设置或脉冲数据(右腕に接続)进程停止发送命令…停止驱动MotomanHSE未运行断开停止启动机器人驱动:C:/RoboDK/api/robot/MotomanHSE.exe启动…ErrorSMS: RoboDK司机对Motoman v4.8.3 (HSE和串行)加载设置:C: / /中/ AppData /漫游用户/ RoboDK-Drivers / MotomanHSE.exe.ini默认工具ID: 0默认关节速度(毫米/秒):10默认线性速度(毫米/秒):5 Big Endian交流:没有数量的外部轴0外部轴对照组1外部轴对照组基础:假机器人对照组1连续超时:250 ms系列暂停:25 SERIAL_BAUD女士:9600 SERIAL_DATA_BITS: 8 SERIAL_PARITY: 2 SERIAL_STOPBITS: 1 SERIAL_FLOW_CONTROL: 0 Not connected Sending command... Using high speed ethernet protocol. Connecting to E-Server Working... Using 7 axis arm Using 0 external axes Using system with 7 axes Working... robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again robot took too long to respond sending again Connection problems